| Select a Cart: | |
| Name your new cart: |
* Only a-z, A-Z, 0-9 and space allowed.
|
| Save Mode: | Copy Items / Move Items |
Please login to save your cart.
The specifications below are for the kitchen cabinet associated with this door sample
| Sample Door Shipping Time: | Samples ship out same day before 12pm Mon-Fri. After 12pm samples will ship out the next business day |
| Shipping Time: |
Ships in 10 to 20 business days |
| Style: | Recessed Square |
| Face Frame: | 3/4” Solid Birch |
| Door Frame: | 3/4” Solid Birch |
| Door Center: | MDF w/Maple Veneer (MDF is used to avoid cracking/warping) |
| Sides: | 1/2" A-Grade plywood with wood veneer |
| Top & Bottom (Wall): | 1/2" A-Grade plywood with wood veneer |
| Bottom (Base): | 3/8" A-Grade plywood with wood veneer |
| Back Panel: | Wall Cabinets: 1/2" Picture Frame Recess Style, Base Cabinets: 1/2" Full Back |
| Shelves: | 3/4 " A-Grade plywood with wood veneer |
| Base Cabinet Shelf Depth: | 1/2 |
| Drawer Front: | 5-pc recessed panel |
| Drawer Box: | Solid Wood 17mm (close to 3/4") sides, Drawer bottom 1/2" plywood, Drawer length 21". Dovetail construction, Natural finish. |
| Drawer Glides: | Undermount, full extension with soft closing feature |
| Base Corner Supports: | Wood corner brackets with wood I-beam construction |
| Overlay: | Full with Butt doors |
| Hinges: | Concealed 6-way adjustable with Soft Closing Feature |
| Cabinet Interior: | Matches door finish |
| Center Stile: |
No center stile on cabinetry 24"W to 36"W |
| Assembly Method: | Steel Clip |
| Finish: | Waterborne UV finish by Sherwin-Williams |
| Toe Kick: | 1/2" Plywood |
| Installation Rail: | 1/2" Plywood |
| CARB Compliant: | Yes |
| Door Hinges: | Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This) |
| Toe Kicks Included w/Base Cabinets: | Yes |
| Side Panels Finished: | Yes |
| Installation/Design Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. |
| SKU | providence-natural-grey-sample-door |
|---|---|
| Length | No |
| Width | No |
| Height | No |
